USA Free Shipping on Orders Over $89


Motorcycle Tires Buying Guide - Choosing Right Motorcycle Tires

2020-01-12 | Categories: How To Buy | Tags: Motorcycle, Tires

As we all know that tires are probably the most important component on any motorcycle. They are the vital motor parts to performance, comfort and safety. To buy tires online for your bike can save lots of money. While, how to make sure you are choosing the right ones for your motorcycle? Here, we are glad to share the Motorcycle tires buying guide which can help you know what tires you need to replace them.


Without proper tires and routine inspection and maintenance, our motorcycles aren’t going anywhere. The right tires can make a huge difference in how your bike handles.Use this tire guide to learn some of the basics about how motorcycle tires function, their construction and how to find the best motorcycle tires for your bike.




Choosing the right tire type based on your needs


We must first determine the type of tire that fits your bike and riding style. There are four general designations: cruiser, street, dual-sport/ADV, and dirt.The table below details the different types of motorcycle tires available.


Choosing the Right Tire Size


The most important we need to know what the specifications of the tires are for your specific bike and how to match the specifications against those of the tires you are considering. Check your Tire Size Designation as follow: 130/90 R 16 67 H


The first number refers to the tire Section Width, 130 indicates the tire is 130mm wide at its widest point when installed and ready to ride. Measurement of the width of the tread, in a straight line from one side to the other. Almost always a three-digit number. 


The second number refers to tire height, 90 indicates the tire’s sidewall aspect ratio; which is 90 percent as tall as measured as it is wide, or 117mm in this example. The lower the aspect ratio, the shorter the sidewall if section width remains unchanged.The higher the number, the taller the tire. Usually a two-digit number.


Hint: to determine the exact height of a tire, simply multiply the width by the ratio expressed as a decimal (so a ratio of 60 would be converted to 0.6.) So with a 130/90 tire, multiply 130 X 0.9 to arrive at 117mm.


The Letter designation refers to tire construction: For this example, R stands for radial ply. If the carcass design was bias, it would be indicated as “B”.


The third number is the Rim Diameter: 16 indicates the wheel diameter in inches the tire is designed to fit. In this case a 16-inch wheel.


The last number refers to the load index:In this case, H is the designated rating,which means the tire is suitable for speeds up to 130 MPH. 




Bias Tire or Radial Tire ?


Radial tires have a longer life , as well as better steering control, but they make for poor off-road tires and have reduced grip at slow speeds. By construction, radial tires sidewalls are not stiff as bias-ply tires. This allows the sidewalls to contour to the road better, improving surface area to the section or tread. 


Bias-ply tires are still sticking around, but for good reason. Due to the stiffer sidewalls, bias-ply tires come standard on many heavy cruisers and touring bikes. The lack of flex works well for bikes designed to carry passengers and/or luggage.


That’s HexAutoParts’ basic motorcycle tire buyer’s guide. Hope this article can you know what type of tires they need and also when they should change out worn tires to ensure a smooth and safe ride.If you need to choose cheap motorcycle tires, you can come to our tires pages which can offer sufficient high quality and cheap tires online. Useful tips for new tires we will update later.